Tuesday, November 3, 2009
software books
http://rapidshare.com/files/302365620/Introduction_to_Oracle9i_SQL_-_Volume_I.pdf
oracle_9i_sql.pdf
http://rapidshare.com/files/301773649/oracle_9i_sql.pdf
oracle9i.pdf
http://rapidshare.com/files/301773397/oracle9i.pdf
OOPS1.doc
http://rapidshare.com/files/301773041/OOPS1.doc
let_us_C.pdf
http://rapidshare.com/files/301772868/let_us_C.pdf
glossary-current.pdf
http://rapidshare.com/files/301771493/glossary-current.pdf
BPB_Publications_-_Test_Your_C_Skills.pdf
http://rapidshare.com/files/301771411/BPB_Publications_-_Test_Your_C_Skills.pdf
Sunday, October 25, 2009
HP COMPAQ Drivers
If you are facing the same problem, then don't waste your time by googling. I suggest you to directly contact one of the HP Customer executive through online chat provided in their HP Customer Support page and find an immediate solution for your problem. But for this you need to input some details regarding your laptop like serial no and product no and your details like chat name, email address etc.
Here are all the links to install drivers for Compaq Presario C707 TU notebook for Windows xp sp2.
1. Mobile Intel 965 Express Chipset Family Video/Graphics Driver
ftp://ftp.hp.com/pub/softpaq/sp38001-38500/sp38326.exe
2. Intel Chipset Installation Utility for ICH8
ftp://ftp.hp.com/pub/softpaq/sp36501-37000/sp36880.exe
3. ALPS Touchpad Pointing Device Driver
ftp://ftp.hp.com/pub/softpaq/sp38001-38500/sp38113.exe
4. HP Software Update
ftp://ftp.hp.com/pub/softpaq/sp36001-36500/sp36292.exe
5. Broadcom Wireless LAN Driver
ftp://ftp.hp.com/pub/softpaq/sp34001-34500/sp34152.exe
6. Intel PRO/Wireless Drivers
ftp://ftp.hp.com/pub/softpaq/sp34001-34500/sp34489.exe
7. Mass Storage Device Driver
ftp://ftp.hp.com/pub/softpaq/sp38001-38500/sp38330.exe
8. Realtek RTL8139/810x Family Fast Ethernet NIC Driver
ftp://ftp.hp.com/pub/softpaq/sp38001-38500/sp38329.exe
This model of notebook has an audio controller that supports the high definition audio. You need to have Microsoft Universal Audio Architecture (UAA) Bus Driver for High Definition Audio installed on the computer before installing the audio driver.
Here is the link for the Microsoft Universal Audio Architecture driver that need to be installed before installing the audio driver:
9. Microsoft Universal Audio Architecture (UAA) Bus Driver
ftp://ftp.hp.com/pub/softpaq/sp33501-34000/sp33867.exe
After installing the UAA driver reboot the notebook nad install the audio driver from the following link:
10. Conexant High Definition Audio Driver
ftp://ftp.hp.com/pub/softpaq/sp35501-36000/sp35940.exe
Installing this driver may result in an error. But continue with the following steps to get the audio driver installed correctly.
1. Click on Start and select Run. Now type devmgmt.msc and press enter.
2. Right click on "Audio device on High Definition Audio Bus" and click Update driver.
3. Select "Install from a list or specific location"
4. Click Next. Then select "Don't search, I will choose the driver to install"
5. Click Next and then select "Sound, video and game controller" from the list.
6. Click Next and then click Have Disk.
7. Click Browse C:\swsetup\sp35940 folder and the double click the V32 folder. Select the .inf file, click open and Continue with the onscreen instructions.
Similarly install Modem Drivers form the link below:
11. Conexant HDAUDIO Soft Data Fax Modem with SmartCP Driver
ftp://ftp.hp.com/pub/softpaq/sp33501-34000/sp33839.exe
Installing this driver may result in an error. But continue with the following steps to get the Modem driver installed correctly.
1. Click on Start and select Run. Now type devmgmt.msc and press enter.
2. Right click on "Modem device on High Definition Audio Bus" and click Update driver.
3. Select "Not at this time", click on next and Select "Install from a list or specific location"
4. Click Next. Then select "Don't search, I will choose the driver to install"
5. Click Next and then select "Modem" from the list.
6. Click Next and then click Have Disk.
7. Click Browse C:\swsetup\sp33839 folder and select the .inf file and click open and Continue with the onscreen instructions.
12. HP Quick Launch Buttons
ftp://ftp.hp.com/pub/softpaq/sp39001-39500/sp39425.exe
13. Cyberlink YouCam Webcam Software
ftp://ftp.hp.com/pub/softpaq/sp37501-38000/sp37849.exe
I would like to provide you with an HP web link where we get some technical documents to improve the performance of the notebook, please go through it.
Here is the web link:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c00034290
Here is another web link:
http://www.microsoft.com/windowsxp/using/setup/maintain/improveperf.mspx
Note: The above mentioned URL is a Non-HP website, which does not have any relevant with the third party.
For me alps touch pad driver does not worked. I went with some alternative.
Wednesday, June 17, 2009
Solutions for IES 2009 E&C paper.
The following links are containing key for Indian Engineering Services Exam with solved solutions also.
http://rapidshare.com/files/245567004/IES20091.docx
http://rapidshare.com/files/245567204/IES20092.docx
Tuesday, June 9, 2009
Books for Electronics and Communication Engineering
Integrated Electronics
http://rapidshare.com/files/240382663/6624669-Integrated-Electronics-Jacob-Millman-and-Christos-Hallkias.pdf
Antenna and Wave Propagation
http://rapidshare.com/files/240390531/Antennas_2nd_ed_by_John_D._Kraus.pdf
Control systems - Ogata
http://rapidshare.com/files/240586294/Modern_Control_Engineering__3rd_ed..djvu
DSP
http://rapidshare.com/files/240733208/Discrete-Time_Signal_Processing_-_2ed_-_Oppenheim.pdf
Microwave Engineering
http://rapidshare.com/files/242496455/Microwave_Devices_and_Circuits__samuel_Liao__2_.pdf
Signals and Systems
http://rapidshare.com/files/242498487/Signals_and_Systems__2ed_-_A.V.Oppenheim___A.S.Willsky__Prentice_Hall_.pdf
RS Aggarwal Verbal Reasoning
http://rapidshare.com/files/242517072/R_S_aggarwal_verbal_reasoning.pdf
EMTL by sadiku
http://rapidshare.com/files/242517073/elements_of_electromagnetics_by_sadiku.pdf
GRE Barrons 12th Edition
http://rapidshare.com/files/242517074/Gre_Barrons.pdf
Instrumentation
http://rapidshare.com/files/242517075/Electronic_Instrumentation_-_45069-VSSD_2005-90-71301435.pdf
GK India Year Book 2009
http://rapidshare.com/files/242517076/India_2009.pdf
Materials and Properties
http://rapidshare.com/files/242517077/Electronic_and_Optoelectronic_Properties_of_Semiconductor_Structures_-_singh.pdf
Radar Engineering
http://rapidshare.com/files/242517078/Introduction_to_Radar_Systems.pdf
Tuesday, April 28, 2009
DRDO SET Exam Pattern
100 questions --> correct answer +4 and for wrong answer -1.
And 50 questions-->(+2 -0.5)
questions fromsection b
1.)gk questions : sarnath is in which state?
2)green house effect is causd by?
3)july in india is winter in (New york , beijing , sydney , london)?
4)who s d chairman of planning commission of india?
2.)techie info questions : name of the PSLV which launchd number of sats in 2008?
3)yr of formation of DRDO?
4)SAMYUKTA is developed for (navy,army,airforce,RAC)?
5)TRISHUL is which type of missile?
6)HUMSA is what ??(sonar,mine , tank,night vision device....)
for all dese keep an eye on daily news related to ISRO and DRDO....and follow d DRDO site
like for ur case it can b the chandrayan and d launch of RISAT2 and TESCAR for ISRO(RISAT 1 is also comming up ).....or the interceptor missile test for DRDO....like this ...recent techno developements...
3.)then there was lots of class 11-12 maths..integration....complex number...quadratic equations...limits...differential equations....for this follow GATE maths syllabus
4.)lastly aptitude.....follow any standard text book...
BSNL JTO (Junior Telecom Officers) Previous Year Question Papers with Answers
If the voltage applied across a capacitance is triangular in waveform then the waveform
of the current is-
a) Triangular
b) Trapezoidal
c) Sinusoidal
d) Rectangular
Answer is :- Rectangular
1. One of the following statement which is true for relative dielectric constant is -
a) It is dimensionless
b) It is not equal to unity for vacuum
c) It’s value for all substances is less than one
d) None
Answer is :- It is dimensionless
2. Pure metals generally have-
a) high conductivity and low temperature coefficient
b) high conductivity and large temperature coefficient
c) low conductivity and zero temperature coefficient
d) low conductivity and high temperature coefficient
Answer is :- high conductivity and large temperature coefficient
3. For small size, high frequency coils, the most common core material is
a) Air
b) Ferrite
c) Powdered ion
d) Steel
Answer is :- Air
4. For an abrupt junction Varactor diode, the dependence of device capacitance (C) on
applied reverse bias (V) is given by-
a) C a V1/3
b) C a V-1/3
c) C a V1/2
d) C a V-1/2
Answer is :- C a V-1/3
5. A superconductor is a-
a) A material showing perfect conductivity and Meissner effect below a critical
temperature
b) A conductor having zero resistance
c) A perfect conductor with highest dimagnetic susceptibility
d) A perfect conductor which becomes resistive when the current density through it
exceeds a critical valueAnswer is :-A material showing perfect conductivity and Meissner effect below a critical
temperature
6. When a semiconductor based temperature transducer has a temperature coefficient of –
2500 mV/0C then this transducer is indeed a-
a) Thermistor
b) Forward biased pn junction diode
c) Reverse biased pn junction diode
d) FET
Answer is :- Forward biased pn junction diode
7. The location of lightning arrestor is -
a) Near the transformer
b) Near the circuit breaker
c) Away from the transformer
d) None
Answer is :- Near the transformer
8. Time constant of an RC circuit increases if the value of the resistance is -
a) Increased
b) Decreased
c) Neither a nor b
d) Both a and b
Answer is :- Increased
9. Intrinsic semiconductors are those which -
a) Are available locally
b) Are made of the semiconductor material in its purest from
c) Have more electrons than holes
d) Have zero energy gaps
Answer is :- Are made of the semiconductor material in its purest from
10. The primary control on drain current in a JFET is exerted by -
a) Channel resistance
b) Size of depletion regions
c) Voltage drop across channel
d) Gate reverse bias
Answer is :- Gate reverse bias
11. The electrical conductivity of metals which is expressed in ohm-1 m-1 is of the order
of -
a) 1010
b) 105
c) 10-4
d) 10-6
Answer is :- 105
12. When biased correctly, a zener diode –
a) acts as a fixed resistance
b) has a constant voltage across it
c) has a constant current passing through it
d) never overheats
Answer is :- has a constant voltage across it
13. The current amplification factor adc is given by –
a) IC/IE
b) IC/IB
c) IB/IC
d) IB/IC
Answer is :- IC/IE
14. Compared to bipolars, FETs have-
a) high input impedance
b) low input impedance
c) same input impedance
d) none
Answer is :- high input impedance
15. The source-drain channel of JFET is -
a) ohmic
b) bilateral
c) unilateral
d) both a and b
Answer is :- both a and b
16. diac is equivalent to a -
a) Pair of SCRs
b) Pair of four layer SCRs
c) Diode and two resistors
d) Triac width
Answer is :- Pair of four layer SCRs
17. When a sample of N type semiconductor has electron density of 6.25 ´ 1011 /cm3 at 300K and if the intrinsic concentration of carriers in this sample is 2.5 ´ 1013/cm3 then the hole density will be –
a) 106/cm3
b) 103/ cm3
c) 1010/ cm3
d) 1012/ cm3
Answer is :- 103/ cm3
18. The statement ‘In any network of linear impedances, the current flowing at any point is equal to the algebraic sum of the currents caused to flow at that point by each of the sources of emf taken separately with all other emf’s reduced to zero’ represents -
a) Kirchhoff’s law
b) Norton’s theorem
c) Thevenin’s theorem
d) Superposition theorem
Answer is :- Superposition theorem
19. One of the following modes which has the characteristics of attenuation becoming less as the frequency is increased and is attractive at icrowave frequencies of circular cylindrical wave guides is –
a) TE1 mode
b) TM01 mode
c) TE01 mode
d) Higher order mode
Answer is :- TE01 mode
20. A two-port network is symmetrical if –
a) z11z22 – z12z21 = 1
b) h11h22 – h12h21 = 1
c) AD – BC = 1
d) y11y22 – y12y21 = 1
Answer is :-AD – BC = 1
21. For transmission line load matching over a range of frequencies, it is best to use a-
a) balun
b) broad band directional coupler
c) double stub
d) single stub of adjustable position
Answer is :- double stub
22. The poles and zeros of a driving point function of a network are simple and interlace on the negative real axis with a pole closest to the origin. It can be realised -
a) by an LC network
b) as an RC driving point impedance
c) as an RC driving point admittance
d) only by an RLC network
Answer is:- only by an RLC network
23. Poles and zeros of a driving point function of a network are simple and interlace on the jw axis. The network consists of elements –
a) R and C
b) L and C
c) R and L
d) R, L and C
Answer is :- L and C
24. For a two port reciprocal network, the output open circuit voltage divided by the input current is equal to –
a) B
b) Z12
c) —
d) h12
Answer is :- Z12
25. In a short electric doublet the radiation properties are so that-
a) The induction field diminishes as the square root of the distance and is only appreciable in the vicinity of the conductor.
b) In the radiation, magnetic field is minimum when the current is maximum.
c) The radiation resistance of a short doublet antenna is extremely high.
d) Mean rate of power through a unit area of spherical sphere surrounding this doublet is
proportional to the square of the elemental length, other factors remaining constant.
Answer is :-Mean rate of power through a unit area of spherical sphere surrounding this doublet is proportional to the square of the elemental length, other factors remaining constant.
26. The frequency modulated (FM) radio frequency range is nearly -
a) 250 –300 MHz
b) 150 – 200 MHz
c) 90 – 105 MHz
d) 30-70 MHz
Answer is :-90 – 105 MHz
27. In an underground cable the distortion in the transmission of carrier frequency can be
eliminated by using -
a) Inductive loading
b) Resistive loading
c) Capacitive loading
d) Shielding
Answer is :- Inductive loading
28. The characteristic impedance of a transmission line with inductance 0.294 mH /m and capacitance 60 pF/m is -
a) 49 W
b) 60 W
c) 70 W
d) 140 W
Answer is :- 70 W
30. For a quarter wavelength ideal transmission line of characteristic impedance 50 ohms and load impedance 100 ohms, the input impedance will be –
a) 25W
b) 50Wc) 100W
d) 150W
Answer is :- 25W
31. The depth of penetration or skin depth for an electromagnetic field of frequency ‘f’ in
a conductor of resistivity r and permeability m is-
a) inversely proportional to r and f and directly proportional to m
b) directly proportional to r and inversely proportional to f and m
c) directly proportional to f and inversely proportional to r and m
d) inversely proportional to r and m and directly proportional to f
Answer is :- directly proportional to r and inversely proportional to f and m
32. When an antenna has a gain of 44dB then assuming that the main beam of the antenna is circular in cross-section the beam width will be -
a) 0.4456 0
b) 1.44560
c) 2.44560
d) 3.44560
Answer is :- 2.44560
33. Lens antennas used for microwaves are usually made of -
a) Polystyrene
b) Glass of low refractive index
c) Paraboloid surfaces
d) Dielectric media having large refractive index An,
34. One of the following types of instrument which is an electrometer is -
a) Electrodynamometer
b) PMMC
c) Electrostatic
d) Moving iron
Answer is :- Electrostatic
35. When an ac current of 5A and dc current of 5A flow simultaneously through a circuit
then which of the following statement is true ?
a) An ac ammeter will read less than 10A but more than 5A
b) An ac ammeter will read only 5A
c) A dc ammeter will read 10A
d) A dc ammeter will read zero
Answer is :- An ac ammeter will read less than 10A but more than 5A
36. When Q factor of a circuit is high, then -
a) power factor of the circuit is high
b) impedance of the circuit is high
c) bandwidth is larged) none of these
Answer is :- none of these
37. The resolution of a logic analyser is -
a) the maximum number of input channels
b) the minimum duration of the glitch it can capture
c) it’s internal clock period
d) the minimum amplitude of input signal it can display
Answer is :- the minimum amplitude of input signal it can display
38. A memoryless system is –
a) causal
b) not causal
c) nothing can be said
d) none
Answer is :- causal
39. An air capacitor is a –
a) time variant
b) active device
c) time invariant
d) time invariant and passive device
Answer is :-time invariant and passive device
40. Thermistors are made of -
a) pure metals
b) pure insulators
c) sintered mixtures of metallic oxides
d) pure semiconductor
Answer is :- sintered mixtures of metallic oxides
41. Pirani gauge is used to measure –
a) very low pressures
b) high pressures
c) pressures in the region of 1 atm
d) fluid flow
Answer is :- very low pressures
42. These circuits converts input power at one frequency to output power at a different
frequency through one stage conversion –
a) AC voltage controllers
b) Cyclo converters
c) Phase controlled rectifiers
d) Inverters
Answer is :-Cyclo converters
43. In a forward voltage Triggering thyristor changes from –
a) off state to on state
b) on state to off state
c) on state to on state
d) off state to off state
Answer is :- off state to on state
44. A thyristor, when triggered, will change from forward blocking state to conduction
state if its anode to cathode voltage is equal to -
a) peak repetitive off state forward voltage
b) peak working off state forward voltage
c) peak working off state reverse voltage
d) peak non-repetitive off state forward voltage
Answer is :- peak working off state forward voltage
45. Gate characteristic of a thyristor-
a) is a straight line passing through origin
b) is of the type Vg = a + bIg
c) is a curve between Vg and Ig
d) has a spread between two curves of Vg – Ig
Answer is :-has a spread between two curves of Vg – Ig
46. A four quadrant operation requires-
a) two full converters in series
b) two full converters connected back to back
c) two full converters connected in parallel
d) two semi converters connected back to back
Answer is :-two full converters connected back to back
47. If for a single phase half bridge inverter, the amplitude of output voltage is Vs and the output power is P, then their corresponding values for a single phase full bridge inverter are –
a) Vs, P
b) Vs/2, P
c) 2Vs, 2P
d) 2Vs, P
Answer is :- 2Vs, 2P
48. In an enhancement type MOSFET the output V-I characteristics has –
a) only an ohmic region
b) only a saturation region
c) only ohmic region at 10 W voltage value followed by a saturation region at higher voltages
d)an ohmic region at large voltage values preceded by a saturation region at lower voltages
Answer is :- only ohmic region at 10 W voltage value followed by a saturation region at higher voltages
49. The energy gap in a semiconductor -
a) increases with temperature
b) remains constant
c) slightly increase with temperature
d) decrease with temperature
Answer is :-decrease with temperature
50. In an electronic circuit matching means -
a) connecting a high impedance directly to low impedance
b) selection of components which are compatible
c) transferring maximum amount of signal between different kinds of circuits.
d) RC coupled stages
Answer is :-transferring maximum amount of signal between different kinds of circuits.
51. P channel FETs are less superior than N channel FETs because
a) They have higher input impedance
b) They have high switching time
c) They consume less power
d) Mobility of electrons is greater than that of holes
Answer is :- Mobility of electrons is greater than that of holes
52. Small increase in temperature in the CE connected transistor is the -
a) Increase in ICEO
b) Increase in ac current gain
c) Decrease in ac current gain
d) Increase in output resistance
Answer is :- Increase in ICEO
53. An amplifier has a band width of 20 KHz and a midband gain of 50 without feedback. If a negative feedback of 1% is applied then bandwidth with feedback is -
a) 13. 3 KHz
b) 30KHz
c) 10KHz
d) 40KHz
Answer is :- 30KHz
54. The output of a class B amplifier -
a) is distortion free
b) consists of positive half cycles only
c) is like the output of a full wave rectifier
d) comprises short duration current pulses
Answer is :- consists of positive half cycles only
55. An amplifier with negative feedback -
a) lowers its lower 3 dB frequency
b) raises its upper 3 dB frequency
c) increases its bandwidth
d) all of the above
Answer is :- all of the above
56. What changes would be necessary in block C if FM signals are to be received -
a) Block becomes redundant
b) A FM detector would be required
c) A high frequency signal generator
1d) An additional local oscillator will be needed
Answer is :- A FM detector would be required
57. The main disadvantage of Diode-Transistor logic (DTL) is its-
a) greater speed
b) slower speed
c) average speed
d) none of the above
Answer is :- slower speed
58. Time delay Dt in digital signals in an SIS O shift register is given by –
a) Dt = N ´ Fc
b) Dt = N ´ 1/Fc
c) Dt = 1/N ´ Fc
d) Dt = N ¸ 1/Fc
Answer is :- ?t = N ´ 1/Fc
59. The output Qn is 1 in a JK flip flop and it does not change when clock pulse is
applied) The possible combination of Jn and Kn can be –
(y denotes don’t care)
a) y and 0
b) y and 1
c) 0 and y
d) 1 and y
Answer is :- y and 0
60. Basic memory cell of dynamic RAM consists of –
a) a flip flop
b) a transistor acting as a capacitor
c) a transistor
d) a capacitance
Answer is :- a transistor acting as a capacitor
61. The 2’s complement of 10002 is –
a) 0111b) 0101
c) 1000
d) 0001
Answer is :-1000
62. Master slave flip-flop is made up of –
a) two flip flops connected in series
b) two flip flops connected in parallel
c) a debouncer circuit
d) a-D- latch
Answer is :-two flip flops connected in series
63. Number of nybbles making one byte is –
a) 2
b) 4
c) 8
d) 16
Answer is :- 2
64. The intrinsic impedance of free space-
a) is independent of frequency
b) decreases with increase of frequency
c) increases with increase of frequency
d) varies as square root of frequency
Answer is :-is independent of frequency
65. A system consists of 12 poles and 2 zeroes. Its high frequency asymptote in its
magnitude plot has a slope of -
a) –200 dB/decade
b) –240 dB/decade
c) –230 dB/decade
d) –320 dB/decade
Answer is :- –200 dB/decade
66. Considering the conditions-
1. High loop gain 2. Less ringing 3. Greater damping 4 Negative dB gain margin System stability requirements would include?
a) 1 and 3
b) 1, 2 and 3
c) 1 and 4
d) 2, 3 and 4
Answer is :-2, 3 and 4 swer is :- Polystyrene,
67. In the equatorial plane only Geosynchronous satellite are launched because it is the only plane which provides –
a) 24 hour orbit
b) stationary satellite
c) global communication
d) zero-gravity environs
Answer is :- stationary satellite
68. Radio Broadcasting is an example of –
a) space multiplexing
b) time multiplexing
c) frequency multiplexing
d) none of the above
Answer is :- frequency multiplexing
69. PAM signals can be demodulation by using a –
a) Low pass filters (LPE) alone
b) A Schmitt trigger followed by a LPF
c) A differentiator followed by a LPF
d) A clipper circuit by a LPF
Answer is:- A clipper circuit by a LPF
70. In an FDM receiver channels can be separated by using –
a) AND gates
b) Band pass
c) differentiation
d) Integration
Answer is :- AND gates
71. The most common modulation system used for telegraphy is-
a) frequency shift keying
b) two – tone modulation
c) pulse code modulation
d) single tone modulation
Answer is :- frequency shift keying
72. Use of varoctor diode in generation of modulated segial be-
a) FM generation only
b) 100AM generation only
c) PM generation only
d) both PM and AM generation
Answer is :- FM generation only
73. In colour picture tube shadow mask is used to-
a) reduce x-ray emission
b) ensure that each beam strikes only its own dotsc) increase screen brightness
d) provide degaussing for the screen
Answer is :- increase screen brightness
74. The circuit that separates composite video warefore from the sync pulses is-
a) the keyed AGC amplifar
b) a clipper
c) an integrator
d) a sawtooth current
Answer is :- a sawtooth current
75. Band width of microwaves is-
a) 1GHz -103 GHz
b) 1GHz –100 GHz
c) 1 GHz –10 GHz
d) 1 GHz – 106 GHz
Answer is :- 1GHz -103 GHz
76. In transverse Magnetic mode-
a) no electric line is in direction of propagation
b) no magnetic line is in direction of propagation
c) bath magnetic & electric lines are is direction of propagation
d) neither magnetic nor electric lines in direction of propagation
Answer is :- no magnetic line is in direction of propagation
77. Signal transmission in sky wave propagation is due to –
a) Reforction of wave
b) Reflection of wave
c) Pierus through Inosphere
d) None
Answer is :- Reforction of wave
78. According to Barkhausen Criterion Phase shift of signal should be –
a) 6000
b) 9000
c) 18000
d) 36000
Answer is :- 3600
79. The transmission does not have -
a) Partition noise
b) Flicker noise
c) resistance
d) Short noise
Answer is :- Partition noise
80. Varoctor diode has non linearity of -
a) capacitance
b) Inductance
c) Resistance
d) Is a linear device
Answer is :- capacitance
81. Noise figure is calculated as –
a) i/p signal to noise ratio X o/p signal to noise ratio
b) i/p S/N Ratio / O/P S/N Ratio
c) i/p S/N Ratio / O/P S/N Ratio X 100
d) i/p S/N Ratio + O/P S/N Ratio
Answer is :- i/p S/N Ratio / O/P S/N Ratio
82. You can determine quickly the effect of adding poles and zeros by –
a) Nicholas chart
b) Nyquist plot
c) Bode plot
d) Root locus.
Answer is :- Bode plot
83. The polar plot of G(S) = intercepts real axis at w = wo. Then, the real part and wo are given by-
a) –5, 1
b) –2.5, 1
c) –5,0-5
d) –5, 2
Answer is :- –5, 1
84. Laplace transform F (s) of a function f (E) is given by F(s)=10s(s+7)/(s+1)(s+8)(s+10) The initial and final values of F (t) will be respectively-
a) zero and 1
b) zero and 10
c) 10 and zero
d) 70 and 80
Answer is :-10 and zero
85. A satellite link uses different frequencies for receiving and transmitting in order to –
a) avoid interference from terrestrial microwave links
b) avoid interference between its powerful transmitted signals and weak in coming signal
c) minimize free-space losses
d) maximize antenna gain
Answer is :- avoid interference between its powerful transmitted signals and weak in coming signal
86. The first determining factor in selecting a satellite system is its-
a) EIRP
b) Antenna size
c) Coverage area
d) Antenna gain
Answer is :- Coverage area
87. Equalizing pulses in TV are sent during-
a) horizontal blanking
b) vertical blanking
c) the serrations
d) the horizontal retrace
Answer is :-vertical blanking
88. The son seems to have ——– from his father a somewhat gloomy and moody manner-
a) washed
b) inherited
c) admired
d) attempt
Answer is :-inherited
89. Essayist works with words as sculptor with-
a) water
b) stone
c) air
d) hills
Answer is :- stone
90. What is a collection of sheep called ?
a) bunch
b) flock
c) herd
d) comet
Answer is :- flock
91. Join these sentences meaningfully by choosing the correct alternative from the following :
You can buy a book. You can read it.
a) and
b) nor
c) either
d) neither
Answer is :- and
92. What is the opposite of Asperity –
a) gentility
b) superiority
c) kindness
d) clarity
Answer is :- superiority
93. The Election Commission functions under-
a) Ministry of Home Affairs
b) Ministry of Law
c) Prime Minister’s Secretariat
d) None of these
Answer is :-None of these
94. Article 352 of Indian Constitution needs to be revoked in case-
a) President’s Rule is to be imposed
b) Emergency is declared
c) Services of a Government servant are to be terminated without any enquiry
d) A political party of national level is to be banned
Answer is :- Emergency is declared
95. Radio-activity was first discovered by-
a) Becquerel
b) Madam Curie
c) Rutherford
d) Jenner
Answer is :- Becquerel
96. Ninth Plan in India ranges from-
a) 1995-2000
b) 1996-2001
c) 1997-2002
d) 1998-2003
Answer is :- 1997-2002
97. How much electricity does India propose to generate through nuclear power by the
year 2000 AD?
a) 5,000 MW
b) 10,000 MW
c) 15,000 MW
d) 20,000 MW
Answer is :- 10,000 MW
98. In which year did the fall of Bastille take place?
a) 1769
b) 1789c) 1889
d) 1869
Answer is :- 1789
99. To form a quorum how many members of the Lok Sabha or Rajya Sabha should be present?
a) 1/10th of total membership
b) 1/6th of total membership
c) 1/4th of total membership
d) 1/5th of total membership
Answer is :- 1/10th of total membership
100. How may countries are non-permanent members of the Security Council?
a) 6
b) 7
c) 9
d) 10
Answer is :- 10
101. The International Date Line is represented by-
a) 1000
meridian
b) 000
meridian
c) 1800
meridian
d) 900
meridian
Answer is :- 1800 meridian
102. India’s first satellite was launched from-
a) Sriharikota
b) Cape Kennedy
c) Bangalore
d) A Soviet cosmodrome
Answer is :- A Soviet cosmodrome
103. Name the author of the famous book “Politics”-
a) Aristotle
b) Socrates
c) Plato
d) None of them
Answer is :- Aristotle
104. “Guernica” is Picasso’s painting on-
a) The Spanish Civil War
b) The American Civil War
c) The French Revolution
d) The Russian Revolution
Answer is :- The Spanish Civil War
105. The object of the Supreme Court’s Keshvanand Bharati ruling is -
a) To put a limit on Parliament’s amendatory powers
b) To give unlimited powers to Parliament to amend the Constitution
c) To give precedence to Directive Principles over Fundamental Rights
d) None of these
Answer is :- To put a limit on Parliament’s amendatory powers
106. Which country in July ‘99 officially announced mastering of indigenously
developed neutron bomb technology?
a) N. Korea
b) France
c) India
d) China
Answer is :- China
107. Shifting cultivation is commonly used in which of the following states?
a) Tamil Nadu
b) Maharashtra
c) Jammu and Kashmir
d) Nagaland
Answer is :- Nagaland
108) The polar plot of G(S) = 10/s(s+1) 2 intercepts real axis at w = wo. Then, the real part and wo are given by?
Answer is :- –5, 1
Airport Authority Of India Placement Paper
The AAI written Question paper consists of two sections:
1. Non Technical
2. Technical
Section 1:
There are 4 types of questions in the section 1.
These are:
1. GK (General Knowledge questions)
2. General EnglishThe general english test questions are fill in the blanks type, errors, others(r.s aggarwal)
3. Reasoning
4. Other (puzzles, etc.)
Section 2:
The subjects for the section 2 are Microwave & Radar, Communication, Linear - Digital Devices, Networking (CN)
Important sample technical questions for AAI Placement Test:
electronics (engineering), communication, electrical, b.tech
What is a radar used for?
Which frequency do we use in MTI radar (COHO)?
What do you mean by CMRR of an amplifier?
Conversion related questions (binary to hexadecimal, decimal to hex)
Numericals (peak power)
What do you mean by FPGA?
In which OSI layer do we use the bridge?
Various other questions based on OSI Layer (Computer networking questions), TCP/IP protocols (multiple choice type)
Why do we use a delayed AGC?
Numericals based on voltage & current sources.
What is VCO?
Why do we use firewalls?
What is mirroring, RAID, etc.
Relation between transmitted power & range. If we increase power by 16, range increases by ?
Where do we use an AGC in a circuit?
(reciever, oscillator, both, ?)
What kind of feedback is used in an amplifier? (A question similar to this)
is free running. a)monostable multivibrator b)astable c)both d)none
Find input impedance of a transmission line.
Question about Workstations of DNS Server.
Sunday, April 26, 2009
ISRO EXAM ELECTRONICS 2009
Paper contains 80 questions and the time is 90 min.
Each correct answer carries +3 marks and each wrong answer carries -1 marks.
There will be 5 sets of question papers.
In this paper most of the questions are from EMTL, AWT, DIGITAL ELECTRONICS,
COMMUNICATION SYSTEMS AND NETWORKS AND FEW QUESTIONS ONLY ANALOG ELECTRONICS
AND ALL OTHER REMAINING SUBJECTS.
A 5 bit DAC has a current output. For a digital input of 10100, an output current of 10mA is produced. What will be the output current for a digital input of 11101?- 14.5 mA
- 10 mA
- 100 mA
- Not possible to calculate
The ethernet protocol uses- CSMA/CA
- SCPC
- CSMA/CD
- SLOTTED ALOHA
A micro controller differs from a microprocessor in terms of
- I/O interfaces and instruction decoding
- Memory configuration and I/O interfaces
- Data Bus width and Clock speed
- Memory configuration and instruction decoding
An 8-bit microcontroller has an external RAM with the memory map from 8000H to 9FFFH.
- 8193
- 8192
- 8191
- 8190
An audio frequency of 15KHz is frequency modulated with a deviation of 75KHz. The resulting bandwidth is
- 180KHz
- 150KHz
- 210KHz
- 240KHz
Thursday, March 19, 2009
Government Jobs in this week
apply for this asap.
2.CSIR- jr.research assistant 1 post 8,000/-p.m stipend
apply for this in this week. interview date is 25th march.
3.ChennaiPetroChemicalsLimited 1post for Electronics
apply asap.
4.UIIC needs engineer graduates.